Create resin sphere with flowers! We are so happy to share this video and grateful for Preservations By Claire that she shared her content with us. Proud to see how this amazing lady makes this beauty by using our resin supplies. Well done and thank you for your collaboration! Materials/Supplies Used: *Our 2:1 Deep Pour Epoxy Resin Kit *Dried Flowers *Top Coat Resin, New 1:1 *Alcohol spray Tools required: *Personal protective equipment *Scales *Mixing container *Mixing stick *Sphere mold *Sanding paper Process Tips!: *Make sure that your flowers are totally dry. *When mixing epoxy resin, scrape sides and bottom really well, to avoid any streaks in your project. *Pour slowly *With our deep pour epoxy resin kit you can do 10cm sphere in one go at temp 18-20C if it's larger, please do it in a few layers.  *When sanding, use a respirator or do wet sending.  *After sanding, wash your resin piece really well to remove any dust. Thanks for watching! Resin Glory Makers

Beautiful 3D epoxy resin flower coasters. So satisfying to make it. Materials/Supplies Used: *Our 1:1 High Gloss Epoxy Resin kit *Alcohol Inks *White and black paste from our 6 Colour set *Sparkle/glitter in the middle Tools required: *Personal protective equipment *Graded Mixing Cup *Mixing stick *Coaster Molds *Needle for pattern. Process Tips! *After pouring clear resin, let it sit for 20min to get thicker and only then add white resin lines. *Add very thin line of white resin. To color it we use paste from our 6 color set. *After design let it cure for 8h and only then add your background, if you want. Thanks for watching! Resin Glory Makers

Epoxy and alcohol ink is so much fun! Materials/Supplies Used: *Our 1:1 High Gloss Epoxy Resin kit *Alcohol Inks + white sinker Tools required: *Personal protective equipment *Graded Mixing Cup *Mixing stick *Mold *Needle for swirls Process Tips! *After pouring clear resin, let it sit for 20min to get it thicker. *Diffrent inks can react differently, some inks need a couple drops in one place or some only one as well white sinkers can be stronger or lighter, with this technique you have to try first. *After finishing drop colours and before doing swirls let it sit for 20min. *Do gentle swirls and leave it to cure. Thanks for watching! Resin Glory Makers